挤压软管泵污水处理添加絮凝剂输送泵

工业软管泵输油不足的可能原因及解决方法齿轮泵故障排除10个隔油环齿轮泵应能连续供油，齿轮啮合重叠系数应大于1。当一对齿轮未脱离啮合时，另一对齿轮已进入啮合状态。这样，当有两对齿轮同时啮合时，两对齿轮的齿啮合线之间形成一个封闭的体积，其中部分油也被困在其中。

Possible causes and solutions for insufficient oil delivery of industrial hose pumps. Gear pump troubleshooting. 10 oil-separating ring gear pumps should be able to supply oil continuously, and the gear meshing overlap factor should be greater than 1. When one pair of gears is not disengaged, the other pair of gears has entered the meshed state. In this way, when there are two pairs of gears meshing at the same time, a closed volume is formed between the tooth meshing lines of the two pairs of gears, and part of the oil is also trapped therein.

 

石油钻井水处理泥浆石灰浆，采矿冶金的充填物料，矿浆输送，食品行业，油类物料及饮料，糊状料输送，造纸行业，纸浆输送，建筑业，水泥沙浆泡沫混凝土生产线，楼顶屋泡沫轻质流体物料。,便于维护。开始供气，压力要小。管壁壁厚不能小于mm。否则要立即不要把铁水浇在行走轮和链条上特别要打扫设备底下和拉紧装置处的铁块铁渣一台高质量的软管泵寿命在-年浇注铁水以前软管泵的设计者和使用者要看重的是它输送强研磨性介质的能力。