【软管泵-路沿石成型机质量看得见】

软管泵的独到之处：没有其它泵种比软管泵具有更好的自吸能力，几乎可以产生的真空来吸液；输送含气液、泡沫液而无气阻；输送高粘度、剪切敏感性介质也是强项；每转固定的排量而与出口压力无关。

Uniqueness of the hose pump: no other pump has better self-priming ability than the hose pump, and can almost generate vacuum to suck liquid; convey gas-liquid and foam liquid without air resistance; convey high viscosity, shear Cutting sensitive media is also a strength; a fixed displacement per revolution is independent of outlet pressure.

 

软管泵压辊的调整
泵出厂时，压辊已按正常情况调整到位，如遇物料吸不上，或在泵的额定压力下，口量达不到要求，请调整压辊的偏心距，其步骤如下：
（1）先将泵壳两侧相应的圆孔有机玻璃盖板与泵出口端的长方形有机玻璃盖板打开，将转子压辊旋转至两圆孔之间，其螺栓正对圆孔，然后用套筒扳手将两端螺栓拧松，再用小圆棒或十字螺丝刀，对准标有0，1，2，3的圆孔，拨动压辊一侧内的偏心套转动，偏心套的数字越大，其压辊与泵壳间的距离越小，软管压的越紧，其调整是以转子的顶端的刻线为基准，数字越大，压的越紧，反之亦然。
（2）调整间隙时一定要注意不要压的过紧，以达到流量为准，压的越紧，对胶管的寿命影响越大。

众所周知软管泵在运行时，是通过一根U型附有弹性的橡胶软管来完成输送。今天小编需要强调的是，软管存放时间不宜过长，一般以一年为限。在停工期间，对装有软管的泵，若长期不用，每隔一个月需转动泵一次。以免压辊长时间压在泵管的某一处，减弱管子回弹性，影响其流量的输送。

It is well known that when the hose pump is running, it is conveyed through a U-shaped rubber hose with elasticity. Today the editor needs to emphasize that the storage time of the hose should not be too long, and it is generally limited to one year. During the shutdown period, if the pump is equipped with a hose, if it is not used for a long time, the pump needs to be rotated every other month. So as not to press the roller for a long time at a certain position of the pump tube, it will weaken the resilience of the tube and affect its flow rate.